Z7A type locking coupling plateThe Z7 expansion sleeve is a keyless coupling device between the shaft and the sleeve. This device can align the shaft from the outside...
Keyway flange diaphragm couplingThe keyway flange diaphragm coupling relies on the elastic deformation of the diaphragm to compensate the relative displacement of the connected two shafts,...
JSD type serpentine spring couplingThe JSD serpentine spring coupling consists of a jacket, a spherical roller, a half coupling, an inner cover, an outer cover, etc...
NGCL drum gear couplingWhen the NGCL drum gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the inner and outer teeth...
LX star elastic couplingEver-PowerLX star-shaped elastic coupling uses engineering plastics as elastic elements to compensate for the relative deviation of the two shafts...The rigid coupling has good starting performance, which can transform the load starting of the motor into no-load transmission, realize the soft starting of the working machine, reduce the starting current, adjust the transmitted torque, realize overload protection, and have compensation performance.
YLD type flange coupling (also known as flange coupling) is the use of bolts to connect two flange (flange) disc type half couplings, and the two half couplings are respectively connected to the two shafts with keys to achieve The two shafts are connected to transmit torque and movement.
The JQ type-clamping shell coupling uses two axially split shells, which are clamped by bolts to realize the connection of the two shafts. The torque is transmitted by the friction between the two halves of the coupling surface, and the flat key is used for Auxiliary connection.
The surface roughness of GY, GYS, GYH couplings refers to the small spacing and small peak and valley unevenness of the machined surface.The distance (wave distance) between the two wave crests or two wave troughs is very small (below 1mm), which is difficult to distinguish with the naked eye, so it belongs to the microscopic geometric shape error.