Couplings and accessoriesIn mechanical equipment, as long as there is a powerful conversion, transmission, change direction, there will be couplings and accessories,...
ZLL elastic pin gear couplingThe basic parameters and important measurement of ZLL elastic pin gear coupling are used for a lot of non-metallic materials...
SWP_D universal couplingThe two shafts connected by the SWP_D universal coupling are deformed after loading due to manufacturing and installation errors...
JQ type-jacket couplingThe JQ type-clamping shell coupling uses two axially split clamping shells, which are clamped by bolts to realize two...
LX star elastic couplingEver-PowerLX star-shaped elastic coupling uses engineering plastics as elastic elements to compensate for the relative deviation of the two shafts...The clamping shell coupling cannot be processed due to the shaft hole being too long. Therefore, a lifting ring is made in the middle of the axial direction to prevent axial movement and to ensure the accuracy of the shaft hole.
The rigid coupling has good starting performance, which can transform the load starting of the motor into no-load transmission, realize the soft starting of the working machine, reduce the starting current, adjust the transmitted torque, realize overload protection, and have compensation performance.
The brake wheel coupling is mainly composed of two protruding teeth that are closely meshed and subjected to radial compression to transmit torque. When the two axes are relatively offset, the elastic element undergoes corresponding elastic deformation, which plays a role of automatic compensation.
YL type flange coupling is abbreviated as flange coupling, which is a rigid coupling. It connects two flanged half couplings to the two shafts with ordinary flat keys, and then connects the two half couplings with bolts. The shafts are connected as a whole to transmit movement and torque.
The surface roughness of GY, GYS, GYH couplings refers to the small spacing and small peak and valley unevenness of the machined surface.The distance (wave distance) between the two wave crests or two wave troughs is very small (below 1mm), which is difficult to distinguish with the naked eye, so it belongs to the microscopic geometric shape error.