After carburizing and quenching treatment of drum-shaped tooth meshing tooth surface, the bearing capacity is high; the main failure mode of drum-shaped tooth is wear. After using forced thin oil lubrication, the tooth surface wear is greatly reduced, and the amount of wear is 10% of grease lubrication. Around XNUMX, the circulating thin oil can take away the rolling heat at the end of the roll
The gear coupling produced by Ever-Power Machinery is produced in strict accordance with the material and technology required by the user, and is stable in use, and there are situations such as broken teeth.
NL type drum gear coupling is suitable for flexible transmission between shafts, allowing large axial radial displacement and angular displacement, and has easy disassembly and assembly, low noise, low transmission efficiency loss, long service life, etc. Advantages, very popular among users.
When the NGCL drum gear coupling is working, the two shafts produce relative angular displacement, and the tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling needs to be Work in a good and sealed state.
The NGCLZ drum gear coupling is composed of an internal gear ring with the same number of teeth and a flange half coupling with external teeth.The external teeth are divided into two types: straight teeth and drum teeth. The so-called drum teeth means that the external teeth are made into a spherical surface. The spherical surface is on the gear axis, and the tooth side clearance is larger than that of ordinary gears.