Structural features and installation techniques of plum-shaped elastic coupling The quincunx elastic coupling is mainly composed of two protruding teeth closely meshed and subjected to radial compression to transmit torsion...

What should be paid attention to and installation requirements for the maintenance of drum gear couplingsThe requirement of interchangeability of drum gear coupling elements is worthy of our attention: in drum gear coupling every...

The structural characteristics and installation of the serpentine spring couplingThe serpentine spring coupling is a metallic coupling with a structure that relies on the serpentine spring to axially embed the two halves...

Classification and advantages of drum gear couplingsAfter carburizing and quenching treatment on the meshing tooth surface of drum-shaped teeth, the bearing capacity is high; the main failure shape of drum-shaped teeth...

Types of plum blossom flexible couplings and precautions for useThe plum blossom flexible coupling has the ability to compensate and is suitable for working conditions where there is an offset between the two axes, and...

Introduction to the basic structure of the wheel box speed-up wind turbine and the coupling of the wind turbineThe coupling of the wind turbine is mainly to transmit power, but the transmission accuracy must be...

current position:HOME > Product display > Industrial expansion sleeve >

name:

Z5 type expansion joint sleeve

description:The Z5 type expansion coupling sleeve is used for the occasions that transfer large loads and require high centering accuracy.Compared with the Z4 type, the taper of each cone ring is the same, and there is a flange in the middle of the inner ring, which is easy to disassemble. The Z5 type has a longer bonding surface and a smaller taper.

TAG:Z2 type expansion sleeve Z3 type expansion coupling sleeve Z4 type expansion joint sleeve

Detailed introduction:

Z5 type expansion joint sleeveIt is used for the occasions that transfer large loads and require high centering accuracy.Compared with the Z4 type, the taper of each cone ring is the same, and there is a flange in the middle of the inner ring, which is easy to disassemble. The Z5 type has a longer bonding surface and a smaller taper.Our company has sales personnel with rich practical experience to provide transmission and conveying technical services for your company at all times, and your company's equipment runs smoothly.

The basic dimensions and parameters of the Z5 type expansion coupling sleeve:

Basic size (mm)					Rated load		The pressure on the joint surface between the expansion sleeve and the shaft Pt (N/mm2)	Screw tightening torque Ma (NM)	质量 (Kg)
d	D	l	L	L1	Axial force Ft Kn Pax(Mt=0)	Torque Mt kN.m Mt(PAX=0)		Screw tightening torque Ma (NM)	质量 (Kg)
100	145	60	65	77	288	14.4	192	145	4.1
110	155	60	65	77	288	15.8	175	145	4.4
120	165	60	65	77	346	20.8	192	145	4.8
130	180	68	74	86	433	28.1	193	145	6.5
140	190	68	74	86	519	36.3	214	145	7.0
150	200	68	74	86	519	39.0	200	145	7.4
160	210	68	74	86	606	48.5	219	145	7.8
170	225	75	81	95	712	60.6	215	230	10.0
180	235	75	81	95	712	64.1	203	230	10.6
190	250	88	94	108	792	75.2	178	230	14.3
200	260	88	94	108	950	95.0	203	230	15.0
210	275	98	104	120	970	102.0	187	355	17.5
220	285	98	104	120	990	109.0	183	355	19.8
240	305	98	104	120	1318	158.0	222	355	21.4
250	315	98	104	120	1340	167.5	215	355	22.0
260	325	98	104	120	1370	178.0	215	355	23.0
280	355	120	126	144	1590	22.5	188	485	35.2
300	375	120	126	144	1650	248.0	183	485	37.4
320	405	135	142	162	2140	344.0	192	690	51.3
340	425	135	142	162	2140	365.0	181	690	54.1
360	455	158	165	187	2670	480.0	176	930	74.4
380	475	158	165	187	2670	508.0	166	930	79.0
400	795	158	165	187	2670	535.0	158	930	82.8
420	515	158	165	187	3200	673.0	181	930	86.5
450	555	172	180	204	3700	832.0	175	1200	112.0
480	585	172	180	204	3950	948.0	175	1200	119.0
500	605	172	180	204	3950	988.0	168	1200	123.0
530	640	190	200	227	4320	1145.0	157	1600	151.0
560	670	190	200	227	4320	1210.0	148	1600	160.0
600	710	190	200	227	4610	1380.0	147	1600	170.0