Plum elastic couplingA whole plum-shaped elastic ring is installed between the protruding claws of two half-couplings of the same shape to realize the connection of the two half-couplings.
The plum blossom elastic coupling has a high sales volume in the market and is a new product that has attracted attention.Our company has rich experience in couplings, with the conditions and advantages of refined products and mass production, which can meet the various needs of users.
The relative offset of the two shafts is compensated by the elastic deformation of the elastic ring to realize vibration reduction and buffering.This kind of coupling has been standardized, GB/T5272-2002 has five structural forms: LM type (basic type), LMD type (single flange type), LMS type (double flange type), LMZ-I type ( Split brake wheel type) and LNZ-II (full brake wheel type).There are 14 specifications for each type. The applicable shaft hole diameter d=12-160mm, the shaft hole length L=35-135mm, the nominal torque T=25-25000N.m, and the allowable speed [n]=1500- 15300r.min.
Ever-Power plum blossom elastic coupling has simple structure, convenient maintenance and easy inspection; compact, no backlash, providing three different hardness elastomers; plum blossom elastomer has four petals, six petals, eight petals and ten petals; fixed method With top wire, clamping, fixed keyway; can absorb vibration, compensate for radial and angular deviation; maintenance-free, oil-resistant and electrical insulation, working temperature 20℃-60℃.
Plum couplingAfter the completion of the installation, the inspector should check the accuracy of the installation position in order to determine the performance of each fastener.Before the reducer is running, once it is installed improperly, the load will be increased. During the automatic control of the motor, the load between the shafts can be added to improve the sensitivity, which is unmatched by other couplings.The output bearing is subject to a larger radial load, and a reinforced type should also be selected.It is easy to cause damage to the bearing and even break the output shaft.