Z7B type expansion joint sleeveWhen the Z7B expansion coupling sleeve is fixed to the proper position of the shaft sleeve (hub), tighten it according to the given torque...
LMZ quincunx elastic couplingLMZ quincunx elastic coupling has compensation for the relative offset of the two shafts, damping, cushioning, radial scale...
GⅡCL drum gear couplingDue to the angular compensation of the GⅡCL drum gear coupling, the angular compensation of the drum gear coupling is greater than that of the straight gear coupling...
CLZ type gear couplingWhen CLZ type gear coupling is working, the two shafts produce relative angular displacement, and the tooth surface period of the inner and outer teeth...
ZLL elastic pin gear couplingThe basic parameters and important measurement of ZLL elastic pin gear coupling are used for a lot of non-metallic materials...The Z10 type expansion coupling sleeve is suitable for the keyless coupling device between the shaft and the sleeve. It can apply clamping force to the sleeve from the outside to form a mechanical compression fit between the shaft and the sleeve, and transmit torque. The expansion sleeve itself does not Transmit any moment and load, easy to install and disassemble.
The structure, dimensions, and installation methods of the Z9 expansion coupling sleeve product (expansion sleeve) are common to similar products, and all comply with ISO standards.Technical instructions and technical performance can meet the requirements of the use of the machine, and at the same time, they are also the basic accessories for domestically produced replacement parts.
Features of Z8 type expansion coupling sleeve: Z8 type locking coupling disc Z8 type expansion sleeve is suitable for coupling the shaft and the parts on the shaft to transmit torque and axial force.The torque Mt and axial force Ft specified in the standard are calculated according to the corresponding screw tension, and the tightening torque of the screw should reach the required rated value in the technical parameter table.