Plum blossom elastic coupling, pin coupling, drum gear coupling, coupling manufacturer_Ever-Power Machinery Manufacturing Co., Ltd.

  • YL type flange couplingYL type flange couplingYL type flange coupling is abbreviated as flange coupling, which belongs to rigid coupling, which is a combination of two convex...
  • NL type drum gear couplingNL type drum gear couplingNL type drum gear coupling is suitable for flexible transmission between shafts and allows larger axial and radial...
  • SWPG universal couplingSWPG universal couplingFeatures and application of SWPG universal coupling: Bearings are vulnerable parts, for easy replacement...
  • Z6 type expansion coupling sleeveZ6 type expansion coupling sleeveThe main purpose of Z6 type expansion coupling sleeve (referred to as expansion sleeve) is to replace the coupling effect of single key and spline...
  • HL type-elastic pin couplingHL type-elastic pin couplingHL type-elastic pin coupling is a pin made of a number of non-metal elastic materials, placed in two...
  • current position:HOME > TAG label home > "Cross Slider Coupling" TAG List
  • Introduction to the basic structure of the wheel box speed-up wind turbine and the performance requirements of the wind turbine for the couplingRelease Date: 2020-09-27

    The coupling of the wind turbine is mainly used to transmit power, but it has higher requirements for transmission accuracy.During this period, not only must avoid non-metal elastic elements, but also avoid gaps between movable elements.Under this condition, the high-speed rotation process is prevented, and the coupling is prevented from being damaged.

  • Wind turbine's performance requirements for couplings and the failure mechanism of misalignmentRelease Date: 2020-09-22

    Because different couplings have different load bearing capacities, the load that the plum-blossom flexible coupling on the wind turbine generator bears is mainly affected by the impeller, gearbox and generator.If the coupling is affected by its own center of mass and inertia, the unbalanced state of centrifugal inertia will also occur during operation.

  • The introduction of the misalignment of the rotor system is the same as the installation process of the gantry craneRelease Date: 2020-09-18

    Rotor misalignment usually refers to the degree of inclination or deviation between the axis centers of two adjacent rotors and the center lines of the bearings.Rotor misalignment can be divided into coupling misalignment and bearing misalignment.

  • The overall composition and principle of wind turbines and the dangerous factors in the use of hoisting machineryRelease Date: 2020-09-14

    Plum-shaped flexible couplings are in my country, and the capacity of wind turbines ranges from 500KW to 5MW. The mainstream models on the domestic market are 1.5MW. Most of the more than 2MW are under development, and a small number of 4MW and 5MW models are in use. In trial operation.

  • Construction crane inspection items and crane managementRelease Date: 2020-09-10

    In the process of using the crane, the user company should require the manufacturer to provide the corresponding qualification certificate. The manufacturer should also provide the electrical schematic diagram, general diagram, main force-bearing component diagram, installation, use and maintenance instructions of the construction crane, etc., and the maintenance of the crane. Maintenance contracts and inspection reports should also be in place.

  • Gear coupling failure conditions and causes, and a brief introduction to the failure of the rotor system misalignmentRelease Date: 2020-09-05

    Wear is a common defect of gear couplings. During operation, due to relative sliding between the inner and outer gear rings of the coupling, this is the basic cause of wear.

  • The solution to the loose cable of the cable drum and the performance requirements of the coupling for the wind turbineRelease Date: 2020-09-01

    For rail-mounted gantry cranes, plum-shaped elastic couplings have common cable drum failures as follows: cable drum loose cable failure, drum mechanical failure, drum electrical circuit failure, and so on.

  • Comparison of Slider Coupling and Clamping Shell and Flange CouplingRelease Date: 2016-06-02

    The slider coupling is also known as the metal slider coupling. Its slider is ring-shaped and made of steel or alloy. It is suitable for transmissions with low speed and large transmission torque. The slider coupling and the cross The structure of the sliding block coupling is similar, the difference is that the middle cross block is a square sliding block.

  • Total 1Page / 8 Records