NL type drum gear couplingNL type drum gear coupling is suitable for flexible transmission between shafts and allows larger axial and radial...
Keyway flange diaphragm couplingThe keyway flange diaphragm coupling relies on the elastic deformation of the diaphragm to compensate the relative displacement of the connected two shafts,...
Z7B type expansion joint sleeveWhen the Z7B expansion coupling sleeve is fixed to the proper position of the shaft sleeve (hub), tighten it according to the given torque...
LM (ML) plum blossom couplingThe LM (ML) plum coupling is mainly composed of two protruding teeth closely meshed and subjected to radial compression to transmit torsion...
ZL type couplingThe ZL type coupling is used to connect two shafts (the driving shaft and the driven shaft) in different mechanisms...Compared with the Z11 type, the Z2 type expansion coupling sleeve has a long joint surface and high centering accuracy. It is used in the occasions where the rotation accuracy is higher and the transmission of larger loads is required.It consists of a split double cone inner ring with different tapers, a split double cone outer ring and two double cone compression rings, which are locked with hexagon socket bolts.
The Z10 type expansion coupling sleeve is suitable for the keyless coupling device between the shaft and the sleeve. It can apply clamping force to the sleeve from the outside to form a mechanical compression fit between the shaft and the sleeve, and transmit torque. The expansion sleeve itself does not Transmit any moment and load, easy to install and disassemble.
The structure, dimensions, and installation methods of the Z9 expansion coupling sleeve product (expansion sleeve) are common to similar products, and all comply with ISO standards.Technical instructions and technical performance can meet the requirements of the use of the machine, and at the same time, they are also the basic accessories for domestically produced replacement parts.