LMD plum blossom flexible couplingThe middle elastic body of the Ever-PowerLMD plum elastic coupling closely meshes with the claws of the two half couplings and...
Three-jaw coupling for pumpThe three-jaw coupling for pumps is a kind of water pump coupling, the middle sliding block is made of bakelite or polyurethane...
GR-shaped coupling elastic bodyGR-shaped coupling elastic body is one of the main products produced by our company. It is widely used for rolling...
WGZ type gear couplingEver-PowerWGZ type gear coupling structure, flexible operating mechanism, is worth choosing.Our company has ten...
Z7C type expansion joint sleeveThe Z7C type expansion coupling sleeve is a keyless coupling device between the shaft and the sleeve. This device can be...Features of Z8 type expansion coupling sleeve: Z8 type locking coupling disc Z8 type expansion sleeve is suitable for coupling the shaft and the parts on the shaft to transmit torque and axial force.The torque Mt and axial force Ft specified in the standard are calculated according to the corresponding screw tension, and the tightening torque of the screw should reach the required rated value in the technical parameter table.
The Z7C expansion coupling sleeve is a keyless coupling device between the shaft and the sleeve. This device can apply a clamping force to the sleeve from the outside to form a mechanical compression fit between the shaft and the sleeve to transmit torque and expand. The tight sleeve itself does not transmit any torque or load.
When the Z7B expansion coupling sleeve is fixed to the proper position of the sleeve (hub), tighten the bolts according to the given torque, and the tapered inner ring exerts radial force on the sleeve. This forced friction coupling can transmit large torque and load. When the expansion sleeve is clamped, each mating surface has a high pressure and is sealed, which avoids the corrosion of the mating surface.