Z13 type expansion joint sleeveWhen the rated load of the Z13 expansion coupling sleeve is less than the load to be transmitted, more than two expansions can be used...
SWC-WD universal couplingSWC-WD universal coupling is a commonly used coupling.Using the characteristics of its structure...
High-speed diaphragm couplingThe high-speed diaphragm coupling consists of several sets of diaphragms (stainless steel thin plates) interlaced with two halves with bolts...
Rubber couplingStructural features and advantages of rubber couplings: compressible elastomer design, easy assembly, performance,...
Stainless steel couplingThe stainless steel coupling is used to connect two shafts (the driving shaft and the driven shaft) in different mechanisms...The slider coupling is also known as the metal slider coupling. Its slider is ring-shaped and made of steel or alloy. It is suitable for transmissions with low speed and large transmission torque. The slider coupling and the cross The structure of the sliding block coupling is similar, the difference is that the middle cross block is a square sliding block.
The structure of the WH slider coupling is similar to that of the cross slider coupling. The difference is that the middle cross slider is a square slider. The middle slider is used to slide in the corresponding radial grooves on the end faces of the half couplings on both sides. In order to realize the coupling of the two halves of the coupling.