Structural features and installation techniques of plum-shaped elastic coupling The quincunx elastic coupling is mainly composed of two protruding teeth closely meshed and subjected to radial compression to transmit torsion...

What should be paid attention to and installation requirements for the maintenance of drum gear couplingsThe requirement of interchangeability of drum gear coupling elements is worthy of our attention: in drum gear coupling every...

The structural characteristics and installation of the serpentine spring couplingThe serpentine spring coupling is a metallic coupling with a structure that relies on the serpentine spring to axially embed the two halves...

Classification and advantages of drum gear couplingsAfter carburizing and quenching treatment on the meshing tooth surface of drum-shaped teeth, the bearing capacity is high; the main failure shape of drum-shaped teeth...

Types of plum blossom flexible couplings and precautions for useThe plum blossom flexible coupling has the ability to compensate and is suitable for working conditions where there is an offset between the two axes, and...

Introduction to the basic structure of the wheel box speed-up wind turbine and the coupling of the wind turbineThe coupling of the wind turbine is mainly to transmit power, but the transmission accuracy must be...

current position:HOME > Product display > Water pump coupling >

name:

Three-jaw coupling for pump

description:The three-jaw coupling for pumps is a kind of water pump coupling. The middle sliding block is made of cloth-filled bakelite or polyurethane. It is light in weight, simple in structure, easy to install, and inexpensive. It is often used in small power occasions and is suitable for rotating The torque is not large and the speed is high.

TAG:JS coupling JSZ type coupling Serpentine spring coupling

Detailed introduction:

Three-jaw coupling for pumpIt is a kind of water pump coupling. Its middle sliding block is made of cloth-filled bakelite or polyurethane. It is light in weight, simple in structure, easy to install, and inexpensive. It is often used in small power occasions. It is suitable for low torque and high speed. , Two-axis connection without sharp impact.The transmission torque of nylon slide block is small, but it is suitable for high-speed operation and does not need lubrication. The standard code of the water pump industry is Bl104.

①The middle sliding block of the claw coupling is made of cloth bakelite or nylon;

②Small size, light weight, simple structure, easy to install, cheap, often used in small power occasions;

③Small inertia force, suitable for two-axis connection with low torque, high speed and no sharp impact.The transmission torque of nylon slider is small, but it is suitable for high-speed operation and does not need lubrication;

④许用相对径向位移(0.01d+0.25)mm，d为轴直径(mm)；许用相对角位移0度40分；联轴器的附加径向力为(0.1～0.3)P；

⑤The standard code of the water pump industry is Bl104, the maximum allowable torque is 850N·m, and the large shaft diameter is 50mm.